embedded solution
The MPU-6050 combines a 3-axis gyroscope with a 3-axis accelerometer on a single silicon die using an integrated circuit manufacturing process called complementary metal oxide semiconductor (CMOS). This allows motion to be measured at up to 2000 degrees per second.
Read More »MPU6050 the gyroscope for your robots
When you think of the word ‘l293d’, what comes to mind? If you’re like most people, you probably think of something like, ‘Oh, that’s the chip that drives my robot!’ Right? Or maybe “Oh, that’s the chip that allows my robot to move!”. In this post we will explore what l293d actually is and how it does exactly what it does.
Read More »L293D the driving chipOctoprint is a web interface that allows you to monitor and control your 3D printer and collect data on your print job. Install it!
I2C, which stands for “Inter-Integrated Circuit”, is a serial bus interface. It was developed as an alternative to other communication buses such as SPI and UART serial ports. The I2C standard was created by Philips Semiconductor in 1982, but is now managed by the I2C Trade Association (www.i2c-ta.org). This article explains what I2C is and if IoT systems can use it.
Read More »What is I2C
The Arduino Nano adapter is a socket for the Arduino Nano board that does not require soldering.
The MCP23017 is a 16-bit port expander with 32 channels of 12-bit analog-to-digital converters and two generic 8-bit inputs / outputs. Unlike most other port expanders, the MCP23017 has an internal oscillator. The MCP23017 operates at 2 MHz, but can support frequencies up to 1 MHz; It can be cascaded and comes in an 18-pin PDIP package, so you can use it in breadboards and through-hole soldering perfboards. This makes it easy to connect it to other parts of the circuit.
Read More »Port expander MCP23017SPI stands for Serial Peripheral Interface. It is a full duplex serial communication protocol. SPI uses 4 wires to communicate between devices. The SPI has hardware synchronization capabilities, but there are some implementations without it. SPI cabling is implemented with a single master and multiple slave nodes.
Read More »What is the SPI standardThe NRF24L01 can be easily configured with just a few commands and can be used in control applications with a wireless module.
Arduino Nano is a powerful, easy-to-use microcontroller board that is ideal for both beginners and experts. With this product, you can start small and expand your knowledge as time goes by.
The nRF24L01 is a low cost transceiver module that operates in the 2.4 to 2.5 GHz frequency range and uses FSK, GFSK, OOK and ASK modulation techniques to send packets to other radios in the area. The radio also has a built-in voltage regulator that allows it to operate with 5 or 3V power supplies, making it easy to implement in projects. The module can be used with an Arduino board or with any other microcontroller equipped with an SPI interface or pin header for its pins.
Read More »nRF24L01 module
