Do it Yourself
One of the most important factors to consider when it comes to doing a 3D print is the adhesion between the first layer and the printing plate. Without this connection, the entire print cannot be built correctly. In this article, we’ll talk about some of the most common causes and problems of first layer print adhesion and how to fix them.
Read More »bed adherence: warping
The choice of the necessary equipment
After a while, you’ve probably heard of airbrushing. But how do you start painting miniatures with this tool? This article will help you understand what steps to take to get started and how much money to spend on making your wish come true.
Read More »painting miniatures with airbrush
There are more than eight reasons to use OctoPrint. Learn about the benefits of this application and how it can optimize your printing experience.
Sooner or later you may have had a printing error during the night or the need to be able to control a print remotely as you cannot be present at all times. This problem is solved using OctoPrint, a simple and open source software.
Read More »10 REASONS TO USE OCTOPRINT
How many times we were front of paint errors or choices that it’s sometimes do not result to be nice. What are we do for remove the paint on ours miniatures? What are we do for to strip paint miniature? Which are the better materials to use? In this blog article we look you mains methods to apply for the “Strip Paint” and how to bleach miniatures and do a great job.
Read More »Strip Paint Miniature
A good execise for to play and to learn with our Raspberry can be to use it as a network disk or NAS. Albeit nowadays it may seem an useless thing, since the most modern modem routers are equipped with this functionality, we can learn a lot about its use not only as a consumer but also as a slightly more experienced user. Let’s find out how to turn the Raspberry into a NAS.
Read More »transform Raspberry to nas
Which model making tools we can find in a modeller’s toolbox? In the in a modeller’s toolbox, the ones described below are the tools you need to start building scenographic elements. You are probably already in possession of someone, others will perhaps be unknown to you, let’s go and meet them together. Which type of model making tools we can find in a modeller’s toolbox? Now I’ll explain it to you.
Read More »Model making tools
For make an scenographic elements there is materials that we can’t do less, but with practice we notice that also some materials is suitable. In the miniatures world is always we keep in mind that to recycle is mostly a good idea. In this article we go to know common materials for model making and dioramas, listing strengths and weaknesses and the various uses and processing techniques. Now I show you which materials for model making you can use for a great scenographic job.
Read More »Materials for model making and dioramas
After the first introductory article on Raspberry, where we started setting it up and configuring it, now I show you the main commands guide for to do an efficient work with it.
Read More »Guide to use the Raspberry
Raspberry Pi 3 as seen a significant increase in notoriety in recent years not only among programmers and developers but also among dozens of multimedia and retrogaming enthusiasts. In the version that I proved (rev.3 model B+), single board pc, most famous has increased its technique features among other things by providing Wi-Fi and Bluethoot connectivity.
Read More »First steps with Raspberry Pi 3 model B+
«What Arduino I can use?» : this is the first question that we ask ourselves after to start a do-it-yourself project. The choice between the various boards of rapid prototyping is vast and includes many types. (We can do a project fully embedded for example).
Read More »What Arduino to use?
